Insufficient memory or data to read in plugin floater for this file
Cannot save to this volume
Unable to save paper texture
Super Soften can only be applied to entire images or to bitmapped floaters.
Select %s
You cannot delete the last variant of a brush.
Mosaic data corrupt or wrong format - cannot be unpacked
Script playback nested more than 10 deep (may be script calling itself)
Set Shape Attributes
Set Default Attributes
Set Attributes...
Set Default Attributes...
Recorded shape selection doesn't match current image
Recorded shape selection illegal or corrupt
Creating script thumbnail preview...
Shape data corrupt or wrong format - cannot be unpacked
Insufficient memory to read in Shape data for this file
Copying Image
Transforming Image
Movie
Plugins not allowed during Net Painter.
Grouped floaters may not be placed during Net Painter.
Vector Mosaic information will be lost when saving to a non-RIFF format.
Some shapes were open and could not be converted into selections.
Shapes cannot be saved into the Floater portfolio.
Select Wing Color
Select Selected Point Color
Select Outline Color
Select Fill Color
Select Stroke Color
Select Grout Color
(Current Script)
Not enough memory to save all Shapes into this format.
Not enough memory to save complete thumbnail.
Can't Join This Site - Files are Open
Can't Join Network Painter Session - Painting Already Started
Can't Join Network with File Open
Query Resource Timeout
Sending Resource on Network...
Save Pattern
New Size:
Current Size:
Canvas Size:
Network Painter Active - Cannot Perform Painting Operation Without Green Light
Unable to Access/Create Network Folder
Painter Folder Contains File "Network Folder" - Must Be a Folder
Disconnect First Before Disabling Network
<Network Disabled>
Network Join Failed - Other System Didn't Respond
Network Join Failed - Problems at Other End
Network Join Aborted
Network Join Not Allowed When Already Connected
Network Join to Ourself Not Allowed
Timeout Receiving Network File
Timeout Trying to Join a Painter Network
Attempt to Join Two Networks - Ignored
Domain Name Lookup Failed
Network Connection Already in Progress
Can't Change Port during Network Connection
<bad host name>
Send File Aborted
Timeout Trying to Send File on Network
Sending File on Network...
Can't Access File to Send on Network
Enter File to Send on Network
Hide Annotations
Show Annotations
Hide Grid
Show Grid
Set Guide Color:
y =
x =
Change Nozzle Name
Change Pattern Name
New Nozzle Library:
New Pattern Library:
Open Nozzle Library:
Open Pattern Library:
Nozzle Mover
Pattern Mover
Hide Guides
Show Guides
Hide Rulers
Show Rulers
Converting Tessellation Data Structure into Mosaic Tiles...
Collapsing Group into a Single Floater...
Y
X
Master
Blue
Green
Red
Y: %4.1f
X: %4.1f
Rendering Tiles into Mask...
Rendering Mosaic Tiles...
Open
Pyramid
Creating new resolution image...
Writing Data...
Building Pyramid...
duplicate parameter number found
illegal parameter number found
duplicate token number found
illegal token number found
duplicate script keyword found
maximum number of script keywords exceeded
This operation cannot be done using an empty color set.
Saved Tip Setting
Eraser Pen
Missing left operand for operator.
CMYK Format JPEG Not Supported
Do you really want to convert this large private scrap to clipboard?
Weft Colors
Weft
Warp Colors
Warp
'(' with no matching ')'
JPEG Encoding Error (^1).
JPEG Decoding Error (^1).
Now Copying JPEG File Into Memory...
Now Saving File to JPEG Format...
interleave.
downto.
upto.
rotate.
reverse.
palindrome.
repeat.
template.
block.
Illegal pattern character in block expression.
Illegal block expression syntax.
Color block count too large (128 threads max).
Couldn't allocate result string.
Illegal extend count.
Count for * (repeat) is out of range.
Bad * (repeat) count.
Bad digit in [] (block) count.
Ambiguous '-' operation.
Multiple-valued expression found or too many ('s.
Empty expression found.
Operation has multiple results.
Operation results in empty expression.
Missing right operand for operator.
Operator is in wrong place.
Expression has more than one parameters in it.
Expression has nothing in it.
Empty expression found.
Now Growing...
JPEG
Background
GIF Dictionary Overflow
GIF Encoding Error
GIF Decoding Error.
GIF Version Not Supported.
GIF File Header is Bad.
GIF
Now Copying GIF File Into Memory...
Now Saving File to GIF Format...
This script operation is not allowed with Save Frames on Playback active - aborted.
Number out of scale. The maximum feather amount for a mask is 50 pixels.
Now Imaging Texture...
Now Creating Power Spectrum...
Now Backwards Transforming Data...
Now Forwards Transforming Data...
Painter Help
Select Grid Background Color
Select Grid Line Color
Now Clearing Mask...
Now Softening Mask...
Now Inverting Mask...
Can't Redo
Line
Wand Group %d
Now Adding Frames...
Nozzle File Shape is Incorrect.
Initializing Plugins...
Now Computing Texture...
Select Screen Color
Select Light Color
Select Ambient Light Color
Movie Window
R: %d
B: %d
L: %d
T: %d
H: %d
W: %d
%d Columns
%d Rows
%3d┬░
%d┬░
Floater Size
Canvas Size
%s @ %s
%s:%d/%ld
This AVI Compression Format is not Supported.
No Decompressor Found for this AVI File.
Now Saving QuickTime Movie...
Now Saving AVI Movie...
Now Reading QuickTime Movie...
Now Reading AVI Movie...
AVI
Deleting all frames of a movie is not allowed.
There are no paths in this floater to restore.
Pattern
Pasted Floater
Now Generating Mask for Selected Colors...
You must use Edit:Mask:Feather Mask to feather the mask now.
It is illegal to insert a movie into itself.
There is insufficient space on volume "^1" for this movie (only ^2 frames will fit).
Groups of groups of floaters are not allowed in Make Nozzle From Group.
Weaving Not Found
Brush Not Found
Percentage change in number of pixels is too small...
You must use Edit:Mask:Feather Mask to feather this floater.
File ^1 Cannot Be Opened.
Now dropping all floating selections...
Now dropping the floating selection...
The specified variant "^3" of brush "^1" could not be found in library "^2"
The specified weaving "^1" could not be found in library "^2"
The specified weaving library could not be opened
The specified gradation "^1" could not be found in library "^2"
The specified gradation library could not be opened
Two-Point
Stop Recording Script...
Record Script
The floaters in this image are merged with the canvas layer when saving to this format -- save as RIFF to save the canvas and floaters as independent objects.
Name must be 31 characters or less in length.
File is not in the image hose nozzle format.
Script playback aborted.
Select a file in the Image Hose Nozzle directory:
Too many fonts on this system - only some will be available.
You must turn off Wet Paint before changing your canvas size.
Thinness must be between 0 and 100 percent.
Feather Radius must be between 0 and 100 pixels.
Opacity must be between 0 and 100 percent.
Change Gradation Name
Change Weaving Name
Change Lighting Name
New Gradation Library:
New Weaving Library:
New Lighting Library:
Gradation Mover
Weaving Mover
Lighting Mover
Open Gradation Library File:
Open Weaving Library File:
Open Lighting Library File:
The gradations library file could not be opened.
The weaving library file could not be opened.
The lighting library file could not be opened.
%ld Frames
Movies of different storage types may not be inserted.
Now Applying Script to Movie...
Movies of different sizes may not be inserted.
This script operation is not allowed in Apply Script to Movie - aborted.
Choose Last Numbered File
Choose First Numbered File
QuickTime
Movie
Mask Group %d
You must be in colored mask mode (second Visibility button) to use a masking brush.
Gradation Not Found
Texture Not Found
Now Running ColorTalkΓäó Command...
Mask %d
Insufficient Memory to Completely Represent This Mask As Outlines
Now Creating Outline Representation for Mask...
Bad Color Set file - error on line ^1.
Other Font...
You must first capture a brush before this brush can be built.
Curve %d
Wand Selection %d
Path
Interface not loaded - Use <esc>A to compile it.
The Color Set is Locked.
Text OFF
Text ON
Cols: %d
Rows: %d
Width: %d
Height: %d
Grid OFF
Grid ON
Select File:
Select Movie:
Select Movie:
Enter Movie Name:
Now distorting image...
Painter Movie Scrap
Posterizing Using Color Set...
Right:
Bottom:
Width:
Height:
Untitled Color Ramp
Library
The movie clone source frame corresponding to the current frame does not exist. The last frame of the movie clone source will be used.
Select last numbered file of sequence
Select first numbered file of sequence
Starting numbered file not consistent with ending numbered file.
Numbered filename does not contain enough digits or starts with too large a number to save entire frame stack.
Enter File Name
Shadow
%s and Shadow
B: .
G: .
R: .
Bristly Brush
Single Pixel
Now Adjusting Color...
Can't Open the File "^3"
The preferred Floater Library "^3" could not be opened.
Insufficient Disk Space to Complete Operation
Group %d
You Can't Copy Floaters Between a Data Floater Library and a Resource Floater Library.
Insufficient Space on Disk to Save Floater into Library
Item Missing Referenced in Recorded Floating Path
Illegal Recorded Floating Path Syntax
Recorded Floating Path Enters Non-Grouped Item
Now Reading Script File...
Now Writing Script File...
Input Script File:
Floater %d
Change Floater Name
New Floater Library:
Open Floater Library:
Floater Mover
Copy
Floater
The floater library could not be opened.
Enter Script Name
Now Duplicating Floating Selection...
Can't Open Color Set File
Now Generating Mask...
Select Color Set
Enter Color Set Name
Colors in Set
Color in Set
This color is already in the set.
Save EPS File
Select Font File
Select EPS File
The PICT format does not support pictures more than 4095 pixels in width.
This Water Color look won't work because Wet Paint is not checked on the Options Menu. Check Wet Paint to use this look.
(unused)
Doing Blobs...
Auto Van Gogh cannot be used on the wet layer.
The image does not fit within the printer page.
The registration marks don't fit within the printer page.
Now Writing Main File EPS Data...
TIFF file not Grayscale or RGB.
RIFF file not Grayscale or RGB.
Photoshop format compression method not supported.
Photoshop 3
Change Script Name
Change Brush Look Name
New Script Library File:
New Brush Looks Library File:
Open Script Library File:
Open Brush Looks Library File:
Script Mover
Looks Mover
The specified brush "^1" could not be found in library "^2"
The specified brush library could not be opened
The specified brush look could not be found
The specified brush looks library could not be opened
Now reading EPS file...
Show Palettes
Hide Palettes
Now enforcing video legal colors within the selection...
Now enforcing printable colors within the selection...
Standard
Now resizing selection...
Now applying motion blur to the selection...
Select Mask Color
Look
Texture
Brush Stroke Designer
Munsell Book of Color
Select Color
The Artist's name cannot be edited.
Timestamps cannot be edited.
Open Session Library File:
Auto-Ranging Glass Distortion...
Now Applying Glass Distortion...
Applying Lighting...
Now Marbling the Selection...
The script library file could not be opened.
You must first open or create a new image before playing back this script - playback script aborted.
Now Negating Selection...
Now Highpassing Selection...
Now Sharpening Selection...
Now Softening Selection...
Now Posterizing Selection...
Now Collecting Histogram...
Now Equalizing Selection...
Writing numbered files...
Insufficient memory to allocate font.
Reading numbered files...
V: %
S: %
H: %
Could Not Open the File "^0"
Separation Settings Not Found
Separation Matrix Not Found
Now Resizing the Image...
Now Distorting the Selection...
%d X %d - %s
call (800) 297-COOL
Demo Version - to order
Change Paper Name
Change Path Name
Change Brush Name
This library is already open on the other side.
Painter cannot open this Bitmap file
File is Not Targa Format
File is Not PCX Format
File is Not Bitmap Format
Cannot Open Empty Library
New Path File:
New Paper Texture File:
New Brush File:
Painter Cannot Save Files With This Extension.
Now Saving File to Targa Format...
Now Saving File to PCX Format...
Now Saving File to Bitmap Format...
Now Reading the Windows Clipboard...
Now Writing the Windows Clipboard...
Couldn't Read the Windows Clipboard
Couldn't Write the Windows Clipboard
Open Path Library File:
Path Mover
User-Created
Standard Built-In
Open Paper Library File:
Paper Mover
Brush Mover
<< Copy <<
>> Copy >>
Close
Open...
Open Brush Library File:
The preferred path library file "^3" could not be opened.
No custom spot file found - using round dot.
The preferred brush library file "^3" could not be opened.
Now generating preview for EPS file...
Now Opening Targa File...
Now Opening PCX File...
Now Opening BMP File...
Now applying a paper texture screen to the selection...
Targa
PCX
BMP
Photoshop 2
PICT
TIFF
RIFF
No Thumbnail
%ld K
%d by %d Pixels
Now feathering the selection...
Now rotating the floating selection...
Now Fading...
Now saving for undo...
Error during Publish.
Now building publish data…
Now Applying Surface Texture...
Auto-Ranging Surface Texture...
Now Printing Black Plate...
Now Printing Yellow Plate...
Damaged Grain Resource
Now Printing Image...
Errors Printing File
No Printer is Available
Bad Number Field
Select Paper Color
The maximum number of variants has been exceeded for this brush.
MB
K
Toolbox
Now Inverting All Selections...
Now Clearing All Selections...
Now Saving File To EPS Format...
Painter requires 32 bit QuickDraw to run (System 6.0.5 or later).
Painter requires a 68020 or better CPU to run.
Scratch Pad
Disk Error During Virtual Memory Operation - File May Be Corrupted.
Insufficient Space on Disk to Virtualize Pictures
Insufficient Space on Disk to Open New Picture
Now Printing Magenta Plate...
Now Printing Cyan Plate...
Can't Undo
Redo
Undo
Not Enough Memory to Run Painter!
Now Reading the Macintosh Scrap...
Now Writing the Macintosh Scrap...
Couldn't Read the Macintosh Scrap
Couldn't Write the Macintosh Scrap
Choose a Plug-In Directory. Plug-Ins will take effect when you quit and restart Painter.
Now performing filter...
Now writing export data...
Now reading acquire data...
Plugin not compatible with Painter
Bad export mode
Problem with scanner
Scanner not connected
Bad parameters to plugin
Plugin version not supported
More than 4 planes not supported in Acquire
Plugin Error: ^1
Only RGB and Grayscale Acquire are supported
Now Flipping Vertically...
Now Flipping Horizontally...
Now Filling...
Now Overlaying Color...
Now Adjusting Dye Concentration...
Opened File Must Be an Image
Image is Too Small
Bad Data Encountered in TIFF File
JPEG Compression Is Not Yet Supported Here
Bad TIFF File Header
TIFF File is Planar (Unsupported)
TIFF File Has An Unsupported Number of Bits Per Sample
Unknown TIFF Compression Type
TIFF File Has No Full Resolution Image
Now Saving File to Photoshop Format...
Now Copying Photoshop File Into Memory...
Photoshop File Must Be Grayscale or RGB Format
Errors Reading File Data
File is Not Photoshop Format
Now Saving File to PICT Format...
Now Copying PICT File Into Memory...
Now Saving File to TIFF Format...
Now Copying TIFF File Into Memory...
Now Converting Paper Grain Resources...
Open Paper Grain File:
Clone Buffer Overflow (this shouldn't happen)
Now Cloning Image...
The File Has Been Deleted. Remember to Save Your File.
File Cannot Be Created
Insufficient Space on Disk for File
File Cannot Be Opened
Too Many Opened Files
Bad RIFF Data
Now Building RIFF Compression Table...
Paper Grain Resource Not Found
The preferred paper grain library "^3" could not be opened.
